Anodal EE liq
Aluminum Chemical
Anodal EE is a product for hardcoating anodizing. With the addition of Anodal EEthe conventional sulfuric acid electrolyte can be used for hardcoating without the expense of costly refrigeration or a new high-voltage power supply.
By utilizing Anodal EE additive in your electrolyte both, normal and hardcoat anodizing can be accomplished in the same tank.
Key Features
- Provides less expensive new hardcoat facilities
- Increases the capacity of sulfuric acid anodizing facilities as it allows higher temperatures
- Requires less refrigeration, power and capital cost as compared to low temperature anodizing processes
- Reduces the dissolution of the oxide film under adverse anodizing conditions
- Improves the uniformity of film thickness throughout the entire anodizing tank
- Minimizes the effect of temperature and current density fluctuations during anodization
- May eliminate the honing normally required to obtain a smooth RMS final surface after hardcoating
Disclaimer - The application information and any other information given in this document as well as our product specifications is based on the present state of our knowledge and is intended as a general description of our products and their possible applications. They are non-binding and cannot be taken as a guarantee. Because of the multitude of formulations, production & application conditions, all the above-mentioned data must be adjusted to the circumstances of the customer. As their use lies beyond our knowledge and control, we cannot accept any liability relating to the use of our products in particular applications. No liabilities, including those for patent rights, can be derived from this fact for individual cases. In addition to that, the legal rights of third parties must always be considered. Any customer of this product is responsible for determining the suitability of our products for its particular application and to ensure that any proprietary rights and existing laws and legislation are observed. Our recommendations about the use and processing of the products are of a general nature only and do not exempt the customer from its duty to carry out appropriate testing regarding fitness of the products for customer’s particular purposes and processing conditions. We do not make any warranty with regard to fitness of the products to customer’s particular use or application and its particular conditions of processing.
