x
logo

Hansa Yellow 10G 41 gran. for Paints and Coatings

Pigment Yellow 3

Hansa Yellow 10G 41 gran. is a very green shade and opaque monoazo pigment in granule form. In comparison to Hansa Yellow 10G, the granule form is stronger with improved recrystallization stability and particularly easier to disperse. It exhibits good light- and weather fastness properties.

Key Features

  • 30-50% higher tinctorial* strength than Hansa Yellow 10G (*depending on dispersion parameters) benefit
  • Improved recrystallization stability benefit
  • easy to be dispersed with dissolver benefit
  • Good light fastness benefit
  • Recommended for air drying paints benefit

Key Applications

Product Data

Application Profile Decorative Paints General Industrial Coatings Special Recommendations
Air-drying Alkyds
Physically Drying Paints
Baking Enamels -
Acid Cured Paints
Amine Cured Epoxies
Isocyanate Cured Paints
Waterbased Paints
• recommended ○ limited suitability - not recommended Physical Data
Density [g/cm3] 1.57
Form of Supply coarse granules
Specific surface [m2/g] 12
Oil absorption [ml/100g] 74
Avg. Size of Primary Particles [nm] n.a.
Heat Stability [°C ] 140
Fastness Data
to Light to Weathering
12 month 24 month
LOA AM LOA AM LOA AM
Full shade 7d - 4 - 3-4d -
Deep shade 7 - 4 - 3-4 -
1/3 ST [1:3.2 TiO2] 7 - 3-4 - 3 -
1/25 ST [1:43 TiO2] 6-7 - 2-3 - 2 -
 
Acids 5
Water 5
Butyl Glycol 3
Methyl Ethyl Ketone 2
Xylene 2
Alkali 5
Butanol 2
Butyl Acetate 2
White Spirit 3
Dibutyl Phthalate 2
Blooming High risk of blooming
Fastness to Overpainting NC AM (120°C ) AM (160°C )
3-4 - -
LOA- Air-drying Long Oil Alkyd AM- Baked Alkyd-Melamine NC- Nitrocellulose Combination Lacquer
Disclaimer - The application information and any other information given in this document as well as our product specifications is based on the present state of our knowledge and is intended as a general description of our products and their possible applications. They are non-binding and cannot be taken as a guarantee. Because of the multitude of formulations, production & application conditions, all the above-mentioned data must be adjusted to the circumstances of the customer. As their use lies beyond our knowledge and control, we cannot accept any liability relating to the use of our products in particular applications. No liabilities, including those for patent rights, can be derived from this fact for individual cases. In addition to that, the legal rights of third parties must always be considered. Any customer of this product is responsible for determining the suitability of our products for its particular application and to ensure that any proprietary rights and existing laws and legislation are observed. Our recommendations about the use and processing of the products are of a general nature only and do not exempt the customer from its duty to carry out appropriate testing regarding fitness of the products for customer’s particular purposes and processing conditions. We do not make any warranty with regard to fitness of the products to customer’s particular use or application and its particular conditions of processing.