x
logo

Hostatint SA Trans Oxide Yellow 2R

Pigment Yellow 42

Hostatint Trans Oxide Yellow SA-2R is a solvent-containing pigment preparation based on a carrier resin (short oil alkyd resin) that was developed specially for alkyd- and oil-based wood coatings applications.

Key Features

  • High pigment loading and good rheological properties benefit
  • Good compatibility in all major solvent-based industrial paint systems benefit
  • Suitable for automatic and manual dispensers benefit
  • No hazard labelling benefit
  • No special storage requirements associated with their flammability

Key Applications

Product Data

Specifications
Grav. tinct. Strength [%] 95-105
Vol. tinct. Strength [%] 95-105
Density [g/cm3] 1.21 - 1.28
Shade dH (*) +/- 0.5
Purity dC (*) +/- 0.8
Viscosity [Pa*s] 0.5-0.7
Main Fields of Application
  • Solvent, alkyd and oil-based wood finish coatings
Further possible Fields of Application
  • Oil based wood stains/varnishes
Physical Data
Density [g/cm3] 1.25
Composition
Pigment Content [%] 36
Total Solid [%] 86
Solvent [%] 14
Fastness Data
to Light [Scale 1-8] to Weathering [Scale 1-5]
Daylight (DIN EN ISO 105-B01) 12 month middle Europe (DIN EN ISO 105-A02)
Full Shade 8 5
1/25 SD - -
Data may vary as Hostatint SA pigment preparations are standardized on tinting strength. (*) after adjustment of tinctorial strength
Disclaimer - The application information and any other information given in this document as well as our product specifications is based on the present state of our knowledge and is intended as a general description of our products and their possible applications. They are non-binding and cannot be taken as a guarantee. Because of the multitude of formulations, production & application conditions, all the above-mentioned data must be adjusted to the circumstances of the customer. As their use lies beyond our knowledge and control, we cannot accept any liability relating to the use of our products in particular applications. No liabilities, including those for patent rights, can be derived from this fact for individual cases. In addition to that, the legal rights of third parties must always be considered. Any customer of this product is responsible for determining the suitability of our products for its particular application and to ensure that any proprietary rights and existing laws and legislation are observed. Our recommendations about the use and processing of the products are of a general nature only and do not exempt the customer from its duty to carry out appropriate testing regarding fitness of the products for customer’s particular purposes and processing conditions. We do not make any warranty with regard to fitness of the products to customer’s particular use or application and its particular conditions of processing.