searchicon
Sudarshan CONNECT Media Contact Us
Product Finder
x
homeicon Products Permanent Bordeaux FRR for Paints and Coatings
logo

Permanent Bordeaux FRR for Paints and Coatings

Pigment Red 12

Deep, bright bordeaux red mainly for air-drying paints. Because of the risk of blooming at low and medium concentrations, it should be used in stoving enamels only for full shades at higher concentrations after preliminary trials. If it is exposed to aggressive solvents, especially ketones, or in the presence of talcum, the crystal modification can change, causing a severe change in shade.

Print Product Get in Touch

Key Features

  • High tinting strength and brilliance benefit
  • Good weather fastness benefit
  • Moderate solvent fastness properties

Key Applications

Industrial Coatings

Industrial Coatings
Wood Coatings

Wood Coatings
Floor Coatings

Floor Coatings
Area Marking and Traffic Paints

Area Marking and Traffic Paints
Architectural Coatings

Architectural Coatings

Product Data

Application Profile
  • Industrial Coatings
  • Decorative Paints
Special Recommendations
Air-drying Alkyds •
Physically Drying Paints •
Baking Enamels ○
Acid Cured Paints •
Amine Cured Epoxies ○
Isocyanate Cured Paints -
Waterbased Paints •
• recommended ○ limited suitability - not recommended Physical Data
Density [g/cm3] 1.37
Form of Supply powder
Specific surface [m2/g] 25
Oil absorption [ml/100g] 70
Avg. Size of Primary Particles [nm] 95
Heat Stability [°C ] 160
Fastness Data
to Light to Weathering
12 month 24 month
LOA AM LOA AM LOA AM
Full shade 6d 6-7d 2-3d 2-3d 2-3d 2-3d
Deep shade 6 6-7 2-3 - 2 -
1/3 ST [1:8.6 TiO2] 4-5 - 2 - 1 -
1/25 ST [1:86 TiO2] 3 - 1-2 - 1 -
 
Acids 5
Water 5
Butyl Glycol 4
Methyl Ethyl Ketone 2-3
Xylene 2-3
Alkali 5
Butanol 3-4
Butyl Acetate 3
White Spirit 4-5
Dibutyl Phthalate 3
Blooming High risk of blooming
Fastness to Overpainting NC AM (120°C ) AM (160°C )
2-3 1 1
LOA- Air-drying Long Oil Alkyd AM- Baked Alkyd-Melamine NC- Nitrocellulose Combination Lacquer
Disclaimer - The application information and any other information given in this document as well as our product specifications is based on the present state of our knowledge and is intended as a general description of our products and their possible applications. They are non-binding and cannot be taken as a guarantee. Because of the multitude of formulations, production & application conditions, all the above-mentioned data must be adjusted to the circumstances of the customer. As their use lies beyond our knowledge and control, we cannot accept any liability relating to the use of our products in particular applications. No liabilities, including those for patent rights, can be derived from this fact for individual cases. In addition to that, the legal rights of third parties must always be considered. Any customer of this product is responsible for determining the suitability of our products for its particular application and to ensure that any proprietary rights and existing laws and legislation are observed. Our recommendations about the use and processing of the products are of a general nature only and do not exempt the customer from its duty to carry out appropriate testing regarding fitness of the products for customer’s particular purposes and processing conditions. We do not make any warranty with regard to fitness of the products to customer’s particular use or application and its particular conditions of processing.