x
logo

Permanent Yellow P-GRL 07

Pigment Yellow 13

Permanent Yellow P-GRL 07 is a high transparent and high glossy diarylide yellow pigment of the P-grade range with extremely low specific conductivity (< 0,2 mS/cm), especially recommended for NC-alcohol and NC-acetate systems. The improved rheological properties take account of the trend to highly pigmented concentrates.

Key Features

  • Tinctorial strength and gloss benefit
  • High transparency benefit
  • High gloss benefit
  • Extremely low specific conductivity

Key Applications

Product Data

Physical Data
Density [g/CM3] 1.30
pH-value -
Specific surface [m2/g] -
Average particle size [nm] 43
Fineness of grind [pm] -
Viscosity [Pa.s] -
Oil absorption [ml/100g] 37
Fastness Data
Staining of the test medium by:
Test Medium Powder pigment Print / draw-down Changeof the print
Solvent mixture 3 - -
Ethanol 3-4 - -
Ethyl acetate 4 - -
MEK 3 - -
Toluene 3 - -
White spirit 4-5 - -
DOP 5 - -
Paraffine 4-5 5 -
Butter - 5 -
Soap - 5 5
Alkali - 5 5
Acid - 5 5
Heat stability 10 min. 180°C
30 min. 180°C
Light fastness 1/3 SD 5.0% 3-4
Light fastness 10.0% 4
Silver laquer -
Sterilization Water phase Steam phase
- -
 

Applications

Recommended for Paste inks
Sheetfed -
Heatset -
Coldset -
Silkscreen -
Metal deco -
UV curing (Offset) -
Liquid inks
NC alcohol
NC acetate
Waterbased -
Polyvinyl butyral -
Polyamide -
Pub gravure, Toluene -
Decorative laminates -
UV curring (Flexo) -
□ highly recommended • recommended ○ limited suitability - not tested
Disclaimer - The application information and any other information given in this document as well as our product specifications is based on the present state of our knowledge and is intended as a general description of our products and their possible applications. They are non-binding and cannot be taken as a guarantee. Because of the multitude of formulations, production & application conditions, all the above-mentioned data must be adjusted to the circumstances of the customer. As their use lies beyond our knowledge and control, we cannot accept any liability relating to the use of our products in particular applications. No liabilities, including those for patent rights, can be derived from this fact for individual cases. In addition to that, the legal rights of third parties must always be considered. Any customer of this product is responsible for determining the suitability of our products for its particular application and to ensure that any proprietary rights and existing laws and legislation are observed. Our recommendations about the use and processing of the products are of a general nature only and do not exempt the customer from its duty to carry out appropriate testing regarding fitness of the products for customer’s particular purposes and processing conditions. We do not make any warranty with regard to fitness of the products to customer’s particular use or application and its particular conditions of processing.