x
logo

Solvaperm Red 2G

Solvent Red 179

Solvaperm Red 2G is a yellowish red with very good light fastness and excellent heat resistance.

Key Features

  • Highly stable in Polyamide

Key Applications

Product Data

Physical and Chemical Properties
Density [g/CM3] 1.45
Melting point [°C] 260
Alkali resistance 5
Acid resistance 5
Fastness Properties
PS ABS PC PETP PVC-R PA 6
SD 1/3 [g/kg] 1.6 1.8 1.5 1.1 0.5 1.3
Hue angle [°] 28.0 31.0 30.6 25.0 35.5 29.7
Chroma 55.7 55.6 54.3 49.0 56.7 57.5
Light fastness SD 1/25 (Full shade) 7 7 8 6-7 7 7-8
Light fastness SD 1/3 (Reduction) 6 5 5-6 3-4 6 5-6
Heat resistance SD 1/3 (Reduction) [°C] 300 300 340 320 - 300

Applications

Suitable Limited suitability Not suitable
PS/SAN PET Fiber
ABS PET Stretch blow molding
PC
PET
PBT
PVC-R
PA 6
PA 6.6
PA Fiber
PMMA

Reflection curve in PS

 
Disclaimer - The application information and any other information given in this document as well as our product specifications is based on the present state of our knowledge and is intended as a general description of our products and their possible applications. They are non-binding and cannot be taken as a guarantee. Because of the multitude of formulations, production & application conditions, all the above-mentioned data must be adjusted to the circumstances of the customer. As their use lies beyond our knowledge and control, we cannot accept any liability relating to the use of our products in particular applications. No liabilities, including those for patent rights, can be derived from this fact for individual cases. In addition to that, the legal rights of third parties must always be considered. Any customer of this product is responsible for determining the suitability of our products for its particular application and to ensure that any proprietary rights and existing laws and legislation are observed. Our recommendations about the use and processing of the products are of a general nature only and do not exempt the customer from its duty to carry out appropriate testing regarding fitness of the products for customer’s particular purposes and processing conditions. We do not make any warranty with regard to fitness of the products to customer’s particular use or application and its particular conditions of processing.